Legionnaires’ disease is caused by Legionella bacteria infecting your lungs. It’s usually caught by breathing in small droplets of contaminated water.
Legionnaires’ disease is a serious lung infection caused by Legionella bacteria.
The most common symptoms include:
Other symptoms may include:
How is it contracted?
Legionnaires’ disease is caused by Legionella bacteria infecting your lungs. It’s usually caught by breathing in small droplets of contaminated water. The infection isn’t contagious and can’t be spread directly from person to person.
Legionella usually lives in warm freshwater. Common locations include:
The two things that Legionella bacteria need to grow and reproduce are:
Not everyone who breathes in contaminated air droplets will get sick. However, you’re at a higher risk for developing Legionnaires’ disease if you:
Why do I need this Test?
Legionnaires’ disease is a serious, life-threatening illness that requires prompt treatment so it important to diagnose the illness as soon as possible.
How do I perform the Test?
It is very simple – just collect a urine sample in a clean container and use the enclose pipette to transfer 4 drops of urine onto the sample well of the test cassette. You will then be able to read the results after 15 minutes. A positive or negative result is indicated by 2 or only 1 line in the test window respectively.
To read further information about Legionella disease please click here.
DIRECTIONS FOR USE
Allow the test, specimen, and/or controls to reach room temperature (15-30°C) prior to testing.
POSITIVE:* Two lines appear. One colored line should be in the control line region (C) and another apparent colored line should be in the test line region (T). A positive result indicates that Legionella pneumophila was detected in the specimen.
*NOTE: The intensity of the color in the test line region (T) will vary depending on the concentration of Legionella pneumophila present in the specimen. Therefore, any shade of color in the test line region (T) should be considered positive.
NEGATIVE: One colored line appears in the control line region (C). No line appears in the test line region (T). A negative result indicates that Legionella pneumophila antigen is not present in the specimen, or is present below the detectable level of the test.
INVALID: Control line fails to appear. Insufficient specimen volume or incorrect procedural techniques are the most likely reasons for control line failure. Review the procedure and repeat the test with a new test. If the problem persists, discontinue using the test kit immediately and contact your local distributor.
For full instructions on how to use this product click here
Legionnaires disease? Legionnaires’ disease is a serious and potentially fatal form of pneumonia. The name comes from an epidemic in 1976, when 34 American Legion members all mysteriously died after staying at the same hotel. You are more likely to become ill with Legionnaires if you are over 50, have a weakened immune system, drink […]
The lungs are part of the respiratory system.