PetTest Genteel Painless Lancing Device

PetTest Genteel Lancing Device

The PetTest Genteel Lancing Device allows those with diabetic dogs or cats to check their blood sugar without pain, using vacuum and depth control.

Each PetTest Genteel comes with six different sizes of contact tips, 10 sample Butterfly Touch Lancets, and 10 PetTest Lancets. Compatible with most square shaft lancets.

• Give your pup or kitty a break from pain
• No more squeezing
• Waste less test strips
• Choose from several recommended test locations
• Reduces lancet impact

Please watch the video on how to use the PetTest Genteel Lancing Device

Cleaning your PetTest Genteel Painless Lancing Device for pets:

Before every use, wipe the outside of the device with a clean damp cloth.
If the Piston Assembly rises while holding the Activation Button (showing the Vacuum Indicator), this loss of vacuum can be the result of dirt or other contaminants inside Genteel. Only if you are experiencing these symptoms – perform the below Quick Cleaning process. If symptoms persist – perform ‘Deep Cleaning’ process details below. If the symptom still exists, please email us at orders@homehealth-uk.com

Quick Clean (inside)

1. Remove Piston Assembly: De-prime Genteel by pressing Activation Button. Twist Piston Assembly base counter-clockwise until you can pull it out of the Vacuum Tube.
2. O-ring Wipe: Wipe the O-ring on the Piston Assembly with your clean finger to remove surface dirt or other contaminants.

Deep Clean (inside)

1. Remove Piston Assembly: De-prime Genteel by pressing Activation Button. Twist Piston Assembly base counter-clockwise until you can pull it out of the Vacuum Tube.
2. Flush Vacuum Tube: Run fast moving, warm water through the Vacuum Tube and out the Nozzle while repeatedly pressing the Activation Button.
3. Flush Piston Assembly: While running the Piston Assembly under fast-moving, warm water. Wipe the O-ring on the Piston Assembly with your clean finger to remove surface dirt or other contaminants.
4. Dry: Let Genteel air dry thoroughly. Do not reassemble Genteel with moisture in the Vacuum Tube.
5. Reassemble: Put Piston Assembly back inside the Vacuum Tube and twist base clockwise until it locks into place securely. Verify device functions as intended.

How To Use The Genteel Lancing Device

1. Place the PetTest Genteel lancing device on your chosen test location (you may need to shave the testing area).
2. Press and hold the Activation Button until a blood is formed.
3. Lift finger off the Activation Button, then remove the lancing device from pet’s skin.
4. Apply the blood drop to the blood glucose test strip.

Cleaning your PetTest Genteel Painless Lancing Device for pets:

Before every use, wipe the outside of the device with a clean damp cloth.
If the Piston Assembly rises while holding the Activation Button (showing the Vacuum Indicator), this loss of vacuum can be the result of dirt or other contaminants inside Genteel. Only if you are experiencing these symptoms – perform the below Quick Cleaning process. If symptoms persist – perform ‘Deep Cleaning’ process details below. If the symptom still exists, please email us at mailto:orders@homehealth-uk.com

Quick Clean (inside)

1. Remove Piston Assembly: De-prime Genteel by pressing Activation Button. Twist Piston Assembly base counter-clockwise until you can pull it out of the Vacuum Tube.
2. O-ring Wipe: Wipe the O-ring on the Piston Assembly with your clean finger to remove surface dirt or other contaminants.

Deep Clean (inside)

1.  Remove Piston Assembly: De-prime Genteel by pressing Activation Button. Twist Piston Assembly base counter-clockwise until you can pull it out of the Vacuum Tube.
2. Flush Vacuum Tube: Run fast moving, warm water through the Vacuum Tube and out the Nozzle while repeatedly pressing the Activation Button.
3. Flush Piston Assembly: While running the Piston Assembly under fast-moving, warm water. Wipe the O-ring on the Piston Assembly with your clean finger to remove surface dirt or other contaminants.
4. Dry: Let Genteel air dry thoroughly. Do not reassemble Genteel with moisture in the Vacuum Tube.
5. Reassemble: Put Piston Assembly back inside the Vacuum Tube and twist base clockwise until it locks into place securely. Verify device functions as intended.